DIGITEN Humidity Controller Digital Humidistat Pre-Wired Outlet Reptile Humidity Controller for Grow Tent Mushroom Greenhouse Homebrew Fermentation Humidifier Dehumidifier

🌱【Ideal Humidity Control】The humidity controller can regulate and maintain your preferred humidity within a control range from 5%~99%RH. It comes with a sensor probe to reliably track the humidity.<br> 🍻【Safe and Reliable】The humidity controller supports high and low humidity alarm, which is very helpful for protecting the target from any influence that exceeds the humidity range. Customize humidity range and compressor delay, protecting your devices. The controller can automatically save the data or setting even it suddenly goes out of power.<br> 🐸【Plug-and-Play】Easy to use 3 buttons to set up humidity range for humidification and dehumidification modes according to your needs.<br> 🍄【Convenient Design】Illuminated LED display is easy to read and program even in darkness. And you can hang the humidity controller on the wall or hooks to keep cords untangled and neat.<br> 🦎【Application】Widely used with mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing chamber, seed germination, cigar storage, homebrewing, etc.

• Display the sensed humidity, setting humidity, and custom icons on the display indicate working mode on the large LCD screen.
• Easy to use, only 2 steps setting for your application, plug-and-play design. Control humidity by setting values.
• Alarm when sensor error or humidity exceeds limits; Alarm when humidity exceeds high/low humidity setting value.
• It's widely used for Green house, Mushrooms, Seed germination, Home brewing, Ventilator fan, Clothes dryers, Bedroom and air-conditioned room, Fresh storage, Food manufacturing, Laboratory, Reptils, etc.
• Set RV (Run Humidity Value)＜SV (Stop Humidity Value), the humidity controller will be in humidification mode.
• Set RV (Run Humidity Value)＞SV (Stop Humidity Value), the humidity controller will be in dehumidification mode.
• It uses whole new pre-wired design without complicated DIY wiring and is accessible for connecting a dehumidifying/humidifying device directly.
• It supports hang from the eyelet tab, confirm the installation distances and nails/screws size before installing.
• Enjoy more installation flexibility with a 2m(6ft) waterproof probe cord.
• Please be careful not to place the probe in an environment with 100% humidity.
• If ERR appears, please try to insert the probe firmly into the controller.
• Standard reliable 3 prong ground outlet support max current of 10A.
• Input Power Cable Length: 150cm/5ft
• Output Power Cable Length: 18cm/7in
• Specification
• Input Power: 100-240VAC, 50/60Hz
• Output Power: Max. 10A, 100-240VAC
• Output Load: 1100W@110V, 2200W@220V
• Humidity Control Range: 5-99%RH
• Accuracy: ±3%
• Sensor Length: 2m/6ft
• A comfortable choice for reptiles incubating, like lizards, turtle, snake, spider and so on.
• To control a high humidity environment when everything starts to grow up.
• It's ideal to control the humidity in a room with multiple humidity controllers.